Plibrico SR 90
Product #: 12011
Service Temperature Limit: 3400°F
Installation Method: Ramming
Shelf Life: 3 months
Industries: Steel, Foundry, Power Generation, Aluminum, Boilers, Incinerators, Burners
Best Applications: Due to its high workability and fine grain sizing, Plibrico SR 90 is ideal for patching and repairing worn refractory, thin lining applications and for use on studded tubes. Other applications include:
- Burner cones
- Steel and foundry:
- Water cooled pipe covering
- Ladle lips
- Runner linings
- Utility boilers – coal and oil fired:
- Burner throats
- Slag taps
- Cyclone burners
- Hazardous waste incinerators – slagging areas
- Aluminum furnace repairs
Plibrico TDS Link – http://bit.ly/2YwImYq
Product Information
Plibrico® SR 90 is a high alumina, phosphate bond plastic refractory. Manufactured with a fine grain sizing and a soft plastic consistency, this 3400°F service limit plastic utilizes a corundum and bauxite aggregates in an alumina fortified phosphate bonding matrix utilizing Plibrico’s proprietary monoaluminium phosphate. The result is a very workable phosphate bonded plastic refractory with low impurities, iron and alkalies, and stable storage characteristics. Other product attributes include:
- Good hot strength
- Excellent abrasion resistance – 5cc loss per ASTM C 704
- Very good slag resistance
- Non-wetting to aluminum
- Meets ASTM classification C673 90% Alumina
Available Internationally As: Plico® SR 90
Plibrico SDS Link – http://bit.ly/2P37jHW
Find Your Refractory Solutions at McNeil
Ready to work with McNeil for your refractory solutions? Contact us below and get in touch with our team!
Contact Us