Plibrico SiC 80
Product #: 10075
Service Temperature Limit: 2700°F
Installation Method: Ramming
Shelf Life: 3 months
Industries: Power Generation, Waste-To-Energy, Boilers, Burners
Best Applications: Plibrico SiC 80 is designed for applications where high thermal conductivity and/or slag resistance is required. For example, a thin wall covering on heat exchanger tubes in a slagging or corrosive environment. Other applications include:
- Burners
- Utility boilers – coal and oil fired
- Cyclone burners
- Circulating fluidized bed boilers
- Municipal waste co-gen incinerators
Plibrico TDS Link – http://bit.ly/2Lkooe8
Product Information
Plibrico® SiC 80 is a phosphate bond, silicon carbide plastic refractory. This product incorporates Plibrico’s proprietary monoaluminium phosphate, with a refractory grade silicon carbide in an alumina fortified phosphate bonding matrix. The result of this combination is a high silicon content phosphate bonded plastic refractory with low impurities – iron and alkalis. Plibrico SiC 80 also has good workability and stable storage characteristics. Other product attributes include:
- High silicon carbide content – 80% SiC
- Good hot strength
- Low shrinkage
- High thermal conductivity
- Very good slag resistance
- Good thermal shock resistance
Plibrico SiC 80 is available in standard, stiff and soft consistencies to conform to installation and storage requirements.
Available Internationally As: Plico® SiC 80
Plibrico SDS Link – http://bit.ly/2YjbrGP
Find Your Refractory Solutions at McNeil
Ready to work with McNeil for your refractory solutions? Contact us below and get in touch with our team!
Contact Us